manualshive.com logo in svg

Roland VersaUV LEF-20, Руководство пользователя

Поделиться
Скачать
Roland VersaUV LEF-20 Скачать руководство пользователя страница 64

Read This Section Whenever You Face a Problem (FAQ)

62

Chapter 3  Appendix

The Print Heads Do Not Move

If the print-head carriage stops anywhere other than the home position (the right side of the main unit), take 
action immediately to prevent the heads from drying out .

What to Do First

Switch the sub power off, then back on again .
If the print-head carriage moves to the home position (the right side of the main unit), the operation has 
ended successfully .

If the Print Heads Still Do Not Move

Try switching off the main power, then switching on the main power again, followed by the sub power .

If the print heads still do not move, carry out the following emergency response measure, then contact your 
authorized Roland DG Corp . dealer or us .

Procedure

1. 

Turn off the main power switch .

2. 

Open the front cover .

3. 

Gently move the print-head carriage to the home position by hand .

Stop when you hear the print-head carriage click into place .

4. 

Close the front cover .

Содержание VersaUV LEF-20













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды