manualshive.com logo in svg

Roland VersaUV LEF-20, Руководство пользователя

Поделиться
Скачать
Roland VersaUV LEF-20 Скачать руководство пользователя страница 42

Checking for Remaining Ink and Replacing Ink Cartridges

40

Chapter 2  Maintenance

How to Replace the Ink 

Cartridges

When ink runs out, a warning beep sounds 
and printing pauses (unless the factory default 
settings have been changed) . Pull out the 
empty cartridge and insert a new one . After 
replacing the ink cartridge, close the front 
cover . Printing resumes .

NOTE

Be sure to hold the handle of the front cover 
and open and close it gently .

Procedure

1. 

Check the number flashing on the screen .

 1   2,, 3,, 4,,
 5,, 6,,

The ink at the flashing cartridge slot number is 
running out .

2. 

Open the front cover .

3. 

Shake a new ink cartridge of the same type 
and color 50 times (about 15 seconds) .

If ink components precipitate, it will not be 
possible to print with correct colors . So that 
the ink mixes well, shake the ink cartridge 
horizontally with a stroke length of around 5 
cm (2 in .) from each end of the ink cartridge .

4. 

Pull out the empty ink cartridge and 
immediately insert the new one .

•  Insert the cartridge so that the side with the arrow 

faces up .

•  Insert and remove cartridges slowly, one at a time .

Arrow

5. 

Close the front cover .

Important notes on replacing ink 
cartridges

•  Be sure to replace each cartridge with an item of 

identical type .

•  Never mix different types of items .
•  Never leave the machine with an ink cartridge 

removed . The print heads may become clogged .

•  Never insert or remove a partially used ink 

cartridge with undue force .

•  Never remove an ink cartridge suddenly while 

the printer is in operation .

 WARNING

Never store ink, cleaning 
liquid, or discharged fluid 
in any of the following 
locations .

•  Any location exposed to open 

flame

•  Any location where high tem-

perature may occur

•  Near bleach or any other such 

oxidizing agent or explosive 
material

•  Any location within the reach of 

children (Accidental ingestion 
by children may pose a health 
hazard .)

Содержание VersaUV LEF-20













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды