Roland VersaUV LEF-12, Руководство по первому запуску

Страница: 37 / 56

Before Using This Printer
35

Use to select the address number.
[SUBNET MASK]: 255.255.255.000
Note: For the subnet mask, make the setting the same value as the one used
by the computer. Here, "255.255.255.000" is entered by way of example.

Press .

Repeat

and

to set the subnet mask.

When you finish making the setting, press .
Press .

Press to go back to the original screen.
If you use the computer and the machine one-on-one basis, this will complete the settings to make on
the printer. Go on to ”Make the Port Settings for the Software RIP.”
If you need to set the gateway address, then go on to the procedure following this one.
3.
Set the gateway address

From the screen displayed in
1.-

, press twice.

Press twice.

Use to select the address number.
[GATEWAY ADDR.]: 255.255.255.255
For the value to enter for your gateway address, consult your network ad-
ministrator. Here, "255.255.255.255" is entered by way of example.

Press .

Repeat

and

to set the gateway address numbers.

When you finish making the setting, press .
Press .

Press to go back to the original screen.
Make the Port Settings for the Software RIP

Install the software RIP and set it up. For the print destination, use the IP address set on the printer. For
settings information, refer to the documentation for the software RIP.

You can check whether the connection to the network has been complete by using the printing-test feature
of the software. For the information on the method to conduct a printing test, refer to the documentation
for the software RIP.
SUBNET MASK
000 . 000 . 000 . 000
SUBNET MASK
255 . 000 . 000 . 000
SUBNET MASK
255 . 255 . 255 . 000
SETUP MEDIA
NETWORK
IP ADDRESS
NETWORK
GATEWAY ADDR.
GATEWAY ADDR.
255 . 000 . 000 . 000
GATEWAY ADDR.
255 . 000 . 000 . 000
GATEWAY ADDR.
255 . 255 . 255 . 255
SETUP MEDIA