Roland VersaUV LEF-12, Руководство по первому запуску

Страница: 32 / 56

Before Using This Printer
30

When this screen appears, pull out the cleaning cartridges.

When this screen appears, pull out the dummy cartridges,
and press .

When a new slot number is displayed, repeat the procedure
from Steps 3 to 6 using the cleaning cartridge you just pulled
out.
Repeat these steps until the screen shown on the left appears.

Make sure the drain bottle is installed, and press .
Cleaning is finished.
3.
Insert the ink cartridges for the respective colors

Before inserting ink cartridges, shake each
of them 50 times (about 15 seconds).
The precipitation of the ingredients in the ink dis-
ables printing in normal color. To allow the ingre-
dients to be mixed well, shake each ink cartridge
horizontally from side to side by 5 cm (2 inches) from
each end of the ink cartridge.

Insert the ink cartridge for each color.
REMOVE CL-LIQUID
1 2
REMOVE DUMMY CRT.
SLOT: 3,4
SET CL-LIQUID
3 4
CHECK
ẅ
DRAIN BOTTLE
1 2 3 4 5 6
SET CARTRIDGE
FILLING INK...
Insert the ink cartridge for each color.
Cartridges to use
Cyan, magenta, yellow, black, gloss, white (one each)