Roland VersaUV LEF-12, Руководство по первому запуску

Страница: 24 / 56

Before Using This Printer
22
STEP 2: Deciding On an Installation Site
Notice
Information is provided in " To Ensure Safe Use " on pages 5 through 18. Be sure to read this guide prior to installing or con-
necting the printer.
Install in a quiet, stable location offering good operating conditions. An unsuitable location can cause accident,
fire, faulty operation, or breakdown.
WARNING
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of combustion
due to ink fumes.
Temperature and Humidity
Maintain the specified temperature and humidity even when the machine is not in use. If temperatures are
too high or too low, it may cause malfunction.
Unsuitable Installation Sites
Following locations can cause malfunction or poor printing quality.

Locations subject to large fluctuations in temperature or humidity

Locations subject to shaking or vibration

Locations where the floor is tilted, not level, or unstable

Dusty locations

Locations exposed to direct sunlight

Locations near air-conditioning or heating equipment

Locations exposed to water or moving air

Locations exposed to considerable electrical or magnetic noise, or other forms of electro-
magnetic energy
During operation: Temperature 20 to 32˚C (68 to 90˚F), relative humidity 35 to 80% (no
condensation)
During non-operation: Temperature 5 to 40˚C (41 to 104˚F), relative humidity 20 to 80%
(no condensation)