Roland VersaUV LEC2-330 Скачать руководство пользователя

Страница: 56 / 56

Specifications

LEC2-640

LEC2-330

Dimensions (with stand)

2,819 (W) × 781 (D) × 1,316 (H) mm

(111 [W] × 31 [D] × 52 [H] in.)

1,945 (W) × 781 (D) × 1,316 (H) mm (77

[W] × 31 [D] × 52 [H] in.)

Weight (with stand)

163 kg (359.3 lb.)

125 kg (275.6 lb.)

Environment

During operation

(*9)

Temperature: 15 to 32°C (59 to 90°F), humidity: 20 to 80%RH (no condensation)

Not operating

Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation)

Included items

Dedicated stand, power cord, blade, blade holder, media clamps, media holders,

replacement blade for separating knife, cleaning liquid, drain bottle, User's

Manual, etc.

The media holders of this machine are designed to be used exclusively with media that has a paper tube (core) with an inner

diameter of 3 inches. To use 2-inch media, the optional media flanges are required.

The length of printing or cutting is subject to the limitations of the program.

• 500 gf is the maximum instantaneous blade force.

• The blade force must be adjusted according to details such as the media thickness.

• Media type: Media specified by Roland DG Corporation

• Temperature: 25°C (77°F), humidity: 50%RH

• Roll media must be loaded correctly.

• Applicable when all pinch rollers that can be used with the media width are used

• Side margins: 25 mm (1.0 in.) or more for both the left and right margins

• Excluding expansion/contraction of the media

• Assumes all correction and adjustment functions of the machine have been used properly

• Print travel: 1 m (39.4 in.)

• [PREFEED] menu item must be set to "ENABLE."

Range for assured repetition accuracy

• For media with a width exceeding 610 mm (24.0 in.): Length: 4,000 mm (157.5 in.)

• For media with a width of 610 mm (24.0 in.) or less: Length: 8,000 mm (315.0 in.)

• Provided that the media feed length is 3,000 mm (118.1 in.) or less

• Excludes the effects of slanted movement and of expansion and contraction of the media

• Data size:

1,000 mm (39.4 in.) in the media feed direction

736 mm (29 in.; 30-inch model) and 1,600 mm (63 in.; 64-inch model) in the carriage-movement direction

• No lamination

• Automatic detection of crop marks at four points when media is reloaded

• During cutting, [PREFEED] menu item must be set to "ENABLE."

• Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media

• Operating environment

Use in an operating environment

within this range.

Содержание VersaUV LEC2-330

























































Результаты поиска

Содержание VersaUV LEC2-330

Отзывы:

Похожие инструкции для VersaUV LEC2-330

Бренды по названию

Популярные бренды

Roland VersaUV LEC2-330, Руководство по установке

Результаты поиска

Содержание VersaUV LEC2-330

Отзывы:

Похожие инструкции для VersaUV LEC2-330

Бренды по названию

Популярные бренды