manualshive.com logo in svg

Roland VersaUV LEC2-330, Руководство по установке

Поделиться
Скачать
Roland VersaUV LEC2-330 Скачать руководство пользователя страница 24

22

1. Checks before Installation

About Placement and Installation Work

The placement and installation of this machine must be performed by suitably qualified workers.

WARNING

 

Entrust operations such as transportation, unloading, and emplacement to trained 

professionals.

Suitable equipment and technical skills are required in handling the machine. Tasks 

that require undue effort may result in a major accident.

Deciding On an Installation Site

Install the machine in a quiet, stable location offering good operating conditions. An unsuitable location can cause 
accidents, fire, faulty operation, or breakdown.

WARNING

 

Install the machine in a location that is level, stable, and able to bear the weight of 

the machine.

The total weight of the machine is 207 kg (456.3 lb.) or more (154 kg [339.5 lb.] or 
more for the 30-inch model). Installation in an unsuitable location may cause a major 
accident, including tip over, fall, or collapse.

WARNING

 

Never install the machine outside or in any location where exposure to water or 

high humidity may occur.

Current leakage may cause electrical shock or fire.

WARNING

 

Never install the machine close to any flammable object or in a gas-filled location.

Combustion or explosion could occur. 

WARNING

 

Install the machine in a clean, brightly lit location.

Working in a location that is dark or cluttered may lead to an accident, such as 
becoming caught in the machine as the result of an inadvertent stumble.

WARNING

 

Position the machine so that the power plug is within immediate reach at all times.

This is to enable quick disconnection of the power plug in the event of an 
emergency. Install the machine next to an electrical outlet. Also, provide enough 
empty space to allow immediate access to the electrical outlet.

CAUTION

 

 Ensure adequate ventilation for the work area.

Failing to perform ventilation may result in a health hazard or danger of combustion 
due to ink fumes.

Unsuitable installation sites

•   Locations subject to large fluctuations in temperature or humidity
•   Locations subject to shaking or vibration
•   Locations where the floor is tilted, not level, or unstable
•   Dusty locations
•   Locations exposed to direct sunlight
•   Locations near air-conditioning or heating equipment
•   Locations exposed to water or moving air
•   Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic energy

Содержание VersaUV LEC2-330

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды