Roland VersaUV LEC2-330 Скачать руководство пользователя страница 2

Страница: 2 / 56

For the USA

F E D E R A L C O M M U N I C A T I O N S
COMMISSION RADIO FREQUENCY
INTERFERENCE STATEMENT

Responsible Party : Roland DGA Corporation

Address : 15363 Barranca Parkway Irvine, CA 92618

U.S.A.

Telephone : 949-727-2100

Type of Equipment :Printer

Model Name :LEC2-640,LEC2-330

NOTE:

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference

in which case the user will be required to correct the

interference at his own expense.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

FCC CAUTION

Changes or modifications not expressly approved by the

party responsible for compliance could void the user’s

authority to operate the equipment.

Use only I/O cables that have been designed and

manufactured specifically for this device.

For Canada

CAN ICES-3 (A)/NMB-3(A)

For California

WARNING:

This product can expose you to chemicals including

lead,which is known to the State of California to cause

cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

For EU Countries

WARNING

Operation of this equipment in a residential environment

could cause radio interference.

For EU Countries

Manufacturer:

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-

ken, 431-2103 JAPAN

The importer in the EU:

Roland DG Europe Holdings B.V.

Prof. J.H. Bavincklaan 2, 1183 AT, Amstelveen, The

Netherlands

For UK

Manufacturer:

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-

ken, 431-2103 JAPAN

The importer in the UK:

Roland DG (U.K.) Ltd.

Griffin House, Windmill Road, Clevedon Business Park,

Clevedon, North Somerset, BS21 6UJ, United Kingdom

NOTICE

Grounding Instructions

• In the event of a malfunction or breakdown, grounding

provides a path of least resistance for electric current to

reduce the risk of electric shock. This tool is equipped

with an electric cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into a matching outlet that is properly installed

and grounded in accordance with all local codes and

ordinances.

•

Do not modify the plug provided - if it will not fit the outlet,

have the proper outlet installed by a qualified electrician.

• Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. The

conductor with insulation having an outer surface that

is green with or without yellow stripes is the equipment-

grounding conductor. If repair or replacement of the

electric cord or plug is necessary, do not connect the

equipment-grounding conductor to a live terminal.

•

Check with a qualified electrician or service personnel if

the grounding instructions are not completely understood,

or if in doubt as to whether the tool is properly grounded.

• Use only 3-wire extension cords that have 3-prong

grounding plugs and 3-pole receptacles that accept the

tool’s plug.

• Repair or replace damaged or worn cord immediately.

Содержание VersaUV LEC2-330

























































Результаты поиска

Содержание VersaUV LEC2-330

Отзывы:

Бренды по названию

Популярные бренды

Roland VersaUV LEC2-330, Руководство по установке

Результаты поиска

Содержание VersaUV LEC2-330

Отзывы:

Бренды по названию

Популярные бренды