Roland VersaUV LEC2-300, Руководство по установке

Страница: 50 / 58

48
2.Installation
4. Network Settings
2.
Set the subnet mask.
A
Press [ ] to display the screen shown below.
NETWORK
SUBNET MASK
B
Press [ ] twice to display the screen shown below.
SUBNET MASK
000.000.000.000
C
Press [ ] or [ ] to select the address number.
D
Press [ ].
E
Repeat steps
C
and
D
to set [SUBNET MASK] to "255.255.255.000."
Note: For the subnet mask, make the setting the same value as the one used by the computer. Here,
"255.255.255.000" is entered by way of example.
SUBNET MASK
255.255.255.000
F
When you have finished making the setting, press [ENTER].
G
Press [ ] to go back to the screen shown below.
NETWORK
SUBNET MASK
If you are using the computer and the machine on a one-to-one basis, this completes the settings to make on the
printer.
Press [MENU] to go back to the original screen. Then, proceed to
P. 49 "Step 3: Make the Port Settings for the Software
RIP"
.
If you need to set the gateway address, proceed to the following procedure.