Roland V-Synth XT, Заметки по обслуживанию

Страница: 54 / 54

74
MAY.2005
Message Boxes
Message boxes are displayed briefly, and then disappear automatically.
fig.message.eps
Message Meaning Action
Canceled! The operation is canceled.
Cannot Delete This Event! The events at the beginning and end of a wave can-
not be deleted.
Checksum Error! The received system exclusive message has an in-
correct checksum value. Correct the checksum value.
Completed! The operation has been completed.
Connecting... Now establishing a connection.
Disconnecting... Now breaking the connection.
Event Doesn’t Exist Here! There is no event at the specified location. Specify a location where there is an event.
Event Interval Too Narrow! The event interval is too narrow for events to be
placed in it. Move the interval further from the nearest event.
Improper Name! The folder name or volume label is blank. Assign a name before you execute (p. 137).
MIDI Buffer Full! An excessive amount of MIDI data was received all
at once, and could not be processed properly.
MIDI Communication Error! A MIDI hardware error has occurred. If the same message appears repeatedly, please con-
tact your dealer or a nearby Roland service center
for service.
MIDI Offline! The MIDI IN connection has been broken. Check whether there is a problem with the MIDI ca-
ble connected to the V-Synth XT’s MIDI IN, or
whether the MIDI cable has been disconnected.
Please Wait a Minute. Please wait a short time.
Processing... The operation is being executed.
Transmitting... The data is being transmitted.
Error Receiving Data! MIDI message could not be received correctly. If the same message appears repeatedly, there is a
problem with the content of the MIDI messages.
USB Offline! USB cable is not connected. Check whether there is a problem with the USB ca-
ble connected to the V-Synth XT’s USB connector,
or whether the USB cable has been disconnected.
Writing... Data is being written.