Roland V-Drums TD-20X Скачать руководство пользователя страница 91

Страница: 91 / 156

Chapter 7. Using CompactFlash Cards [CARD]

You can use a CompactFlash card to do the following.

• Save (back up) 99 sets of the settings in user memory.

• Save 100 patterns (separately from the backups).

• Load backup data from a CompactFlash card into the TD-20X,

or copy specified settings such as drum kits or instruments

into user memory.

• Drum kits that you backed-up on a CompactFlash card can be

played without loading them into the TD-20X (Kit Selection:

p. 121).

• Backups you saved on the TD-20 can be imported into the

TD-20X and used.

Insert a CompactFlash card into the CompactFlash

card slot on the TD-20X’s front panel.

Press the [CARD] button.

The [CARD] button and the CompactFlash indicator light, and

the “CARD A” screen appears.

fig.07-001-card-a.eps_70

fig.07-002-card-b.eps_70

If you insert a card being used for the first time by the

TD-20X, display shows “Unformatted!” Refer to

“Formatting a CompactFlash Card [F1 (FORMAT)]” (p. 94)

and initialize it.

Save/Load and Copy Functions of the TD-20X

fig.CardImage

Using CompactFlash Cards [CARD]

• Never remove a CompactFlash card while the

CompactFlash indicator on the TD-20X’s top panel

is lit. Doing so may corrupt the unit’s data or the

data on the CompactFlash card.

• Carefully insert the CompactFlash card all the way

in—until it is firmly in place.

• Only CompactFlash cards that are designed for 3.3

V and have a capacity of 16 MB–4 GB (Type 1) can

be used with the TD-20X. Other types cannot be

used.

• If a CompactFlash card of larger than 2 GB capacity

is formatted (p. 94) on the TD-20X, it will be

formatted to 2 GB.

Function button (“CARD A” screen)

[F1 (SAVE)]

Saves the TD-20X’s data as a backup.

[F2 (LOAD)]

Loads data from the CompactFlash card
(p. 93).

[F3 (IMPORT)]

Imports TD-20 data into the TD-20X (p. 93).

[F4 (DELETE)]

Deletes data from the CompactFlash card
(p. 94).

[F5 (A<>B)]

Switches between the “CARD A” screen
and “CARD B” screen.

Function button (“CARD B” screen)

[F1 (FORMAT)]

Initializes the CompactFlash card (p. 94).

[F2 (INFO)]

Displays the usage status of the
CompactFlash card (p. 95).

[F5 (A<>B)]

Switches between the “CARD A” screen
and “CARD B” screen.

TD-20X

Setup

Percussion Set

Drum Kit

Inst

Trigger Setting

Drum Kit Chain

Pattern

CompactFlash

CompactFlash card
saved by the non-expan
TD-20

Backup 99

Backup 01

Setup

Percussion Set

Drum Kit

Inst

Trigger Setting

Drum Kit Chain

Pattern

Pattern 100

Pattern 001

Backup 8

Backup 1

COPY

LOAD

SAVE

IMPORT

Pattern

load/save

(p. 89)

TD-20X_e.book 91 ページ２００９年６月８日　月曜日　午後３時５０分

Содержание V-Drums TD-20X





























































































































































Результаты поиска

Содержание V-Drums TD-20X

Отзывы:

Бренды по названию

Популярные бренды

Roland V-Drums TD-20X, Руководство пользователя

Результаты поиска

Содержание V-Drums TD-20X

Отзывы:

Бренды по названию

Популярные бренды