Roland V-Drums TD-20X Скачать руководство пользователя страница 15

Страница: 15 / 156

Features

• The master and headphone volume knobs are

independent.

• The group faders allow quick volume adjustments even

while you perform (P.30).

• The Drum Kit Chain function lets you play kits in any

order you like. Perfect for live performances (P.43).

• Click and Tempo Functions

• You can set the metronome (click) sound to be output ONLY

from the headphones for self monitoring (P.81).

• Each kit can have its own Kit Tempo setting, helpful as well in

a live situation (P.40).

• The tempo Indicator led lets you verify the tempo silently

(P.81).

• The tap Tempo function lets you set the tempo from a pad

(P.80).

• Multiple Output Configurations

By taking full advantage of Master Out L/R and Direct Outs 1–

8, you can use a total of ten outputs. This is ideal for live or

multi-track recording situations. The Master Out L/R, Phones,

and Direct 7/8 can be used as three sets of stereo outputs.

The Digital Out is a coaxial type, 44.1 kHz / 24-bit.

• MIX IN Jack (Stereo)

The MIX IN has its own, independent volume control.

You can choose between stereo and mono, or even mute just

one of the channels. This is ideal for using with drum practice

CDs (with the click in one channel, and the backing in the

other channel) as well as personal monitoring needs (P.113).

Backup Functions

All of the TD-20X’s settings, including 100 drum kits, can be

saved (backed up) on a CompactFlash card. Up to 99 sets of

backup data (100 kits x 99 = 9900 kits) can be stored. This

assures that you can always have backups of your favorite

kits, that you might want to slightly change now and then.

Backup data that was created on the TD-20 is compatible

with the TD-20X, and can be imported into the TD-20X and

used (P.93).

Kit Selection Function

The Kit Selection function allows you to play preset kits or kits

that are saved on a CompactFlash card without having to

load the drum kit into user memory (P.121).

You can use the TD-20X as a MIDI drum sound module. In

addition to the drum kit section the TD-20X also has a full

percussion set. The factory settings mean that the drum kit

part uses MIDI channel 10 and the percussion part uses

channel 11. You can assign and edit instruments to each note

number from #0–#127 of the percussion part.

Optimized Functions for Stage or
Studio

Use CompactFlash Cards for Storing
Data

Use the TD-20X As a MIDI Sound
Module

TD-20X_e.book 15 ページ２００９年６月８日　月曜日　午後３時５０分

Содержание V-Drums TD-20X





























































































































































Результаты поиска

Содержание V-Drums TD-20X

Отзывы:

Бренды по названию

Популярные бренды

Roland V-Drums TD-20X, Руководство пользователя

Результаты поиска

Содержание V-Drums TD-20X

Отзывы:

Бренды по названию

Популярные бренды