Roland U-20, Справочная карта

Страница: 7 / 13

Assigning Individual Outputs
To Assign Timbres To Outputs For Direct/Dry/Reverb/Chorus
Note: If Nothing Is Plugged In To The DIRECT OUT Jacks, The Signal
From The DIRECT OUT Jacks Will Be Output From The MIX OUT Jacks
EDIT
To Sound Then Press
To PRT Then Press
Buttons & The Chart Below To Choose
The Desired Output Assign Value
Buttons & The Chart Below To Choose
The Desired Pan Value
To Output Then Press
To Asgn.
To Pan.
Output Jack Output Assign Pan
Out 1 (Mix L) Dry* - - - - - - - 7<
Out 2 (Mix R) Dry* - - - - - - - >7
Out 3 (Dir 1L) Dir - - - - - - - 7<
Out 4 (Dir 1R) Dir - - - - - - - >7
* If Dry Is Not Chosen For Output Assign, The Reverb Or Chorus
Effect Will Mix The Sound Between The Left & Right Mix Outputs
Then
MIDI Buffer Error - Set Rx SysEx = OFF
Press
Press Three times
Press to select Rx SysEx = OFF
Press To Resume Normal Play Mode
+
+
+