Roland U-20, Справочная карта

Страница: 11 / 13

To Turn Active Sensing OFF*
Press
Press 5 Times & Select Tx Active Sensing
Press And Set Tx Active Sensing OFF
* This Parameter Can Also Be Found Within The EDIT Menu
EDIT

Setup

MIDI

Kybd

TX Active Sensing
By Default, The U-20 Has Active Sensing Turned On. This
Sends A MIDI Pulse Over The MIDI Wire Every 300ms. I Prefer
To Turn Active Sensing Off Because MIDI Message LED's On The
Rest Of My Devices Start Going Bat-Shit Crazy Like A Strobe
Light. Very Distracting. I Like To See MIDI Message LED's
Trigger Only When I Play The Keyboard Or When The Sequencer
Is In Playback-Mode. It Also Unnecessarily Fills Up The MIDI
Buffer Making Troubleshooting Difficult. Also, Several
Devices In A MIDI Chain With Active Sensing Turned On Can
Cause MIDI Buffer Overflows
The Arpeggiator - Operation, Modes And Adjusting
Parameters which can be adjusted are
TYPE: UP, DOWN, UP & DOWN or RANDOM
RATE: 0 to 100
Active Sensing
To set the Arpeggiator Type
Press Then Then
Use To Select TYPE (Blinks)
Use Select UP, DOWN, UP & DOWN Or RANDOM
Press + At Yhe Same Time To Resume
Normal Play Mode
EDIT
ARPEGGIO






VALUE
CURSOR
SOUND
To Set The Arpeggiator Rate
Press Then Then
Use
CURSOR
To Select RATE (Blinks)
Use To Select 0 Through 100
Press + At The Same Time To Resume
Normal Play Mode
EDIT
ARPEGGIO
To Activate The Arpeggiator
Press Then Play A Chord On The Keyboard
ARPEGGIO


VALUE

VALUE DOWN
SOUND
BANK
+
2

RIGHT CURSOR