10
Installing the Batteries
As an alternative to using the AC adaptor, you can use commercially
available AA-size rechargeable Ni-MH batteries.
* When an AC adaptor is used, the unit is powered by the AC adaptor even
if batteries are installed.
* When turning the unit over, be careful so as to protect the buttons from
damage. Also, handle the unit carefully; do not drop it.
1 .
Remove the battery cover .
1-1 .
Remove the thumbscrew from the battery cover.
1-2 .
Slide the battery cover forward and remove it.
Thumbscrew
Battery cover
2 .
Insert the batteries into the battery case in the
correct orientation .
3 .
Close the battery cover .
* Handling batteries improperly may cause the risk of explosion or fluid
leakage. Make sure to carefully observe all of the items related to
batteries that are listed in
“USING THE UNIT SAFELY”
and
“IMPORTANT
NOTES”
(found in the leaflet
“USING THE UNIT SAFELY”
and the Owner’s
Manual).
Remaining battery indication
When the remaining battery power runs low, a battery low icon
(
) appears in the upper right of the display. When this appears,
install fresh batteries as soon as possible.
If you continue to use the instrument in this state, the
“Battery Low!”
message appears, and finally the TAIKO-1 stops functioning entirely.
Turning the Power On/Off
* Before turning the unit on/off, always be sure to turn down the volume
on all connected devices. Even with the volume turned down, you might
hear some sound when switching the instrument on/off. This is normal
and does not indicate a malfunction.
Turning the power on
[
L
] button
[
] [
] buttons
1 .
Turn on the equipment in this order: TAIKO-1 (press
the
[
L
]
button)
0
connected devices .
2 .
Use the
[ ]
[
]
buttons to adjust the volume .
MEMO
Hold down the
[
]
button and press the
[
]
button to make the
value increase quickly. Hold down the
[
]
button and press the
[
]
button to make the value decrease quickly.
* The power to this instrument turns off automatically after a certain
amount of time has passed since it was played or operated (Auto Off
function).
If you do not want the power to turn off automatically, disengage
the Auto Off function.
&
“Setting the Screen and AUTO OFF Function (LCD/Auto Off)”
5
To restore power, turn the power on again.
Turning the power off
1 .
Turn off the equipment in this order: connected
devices
0
TAIKO-1 (long-press the
[
L
]
button) .
Getting Ready
Содержание TAIKO-1
Страница 1: ...2021 Roland Corporation 01...
