1. RECEIVE DATA
Channel Voice Message
• Note Off
Status
Second
Third
8nH
kkH
vvH
9nH
kkH
00H
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
kk = Note number: 00H — 7FH (0 — 127)
vv = velocity: 00H — 7FH (0 — 127)
In the performance mode, ignored when the “MIDI receive switch” is OFF for each part.
In the rhythm part (part 8), ignored when “ENV mode” is at “NO-SUSTAIN” for each rhythm tone.
• Note On
Status
Second
Third
9nH
kkH
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
kk = Note number: 00H — 7FH (0 — 127)
vv = velocity: 01H — 7FH (1 — 127)
In the performance mode, ignored when the “MIDI receive switch” is OFF for each part.
Control change
• Bank select
Status
Second
Third
BnH
00H
mmH
BnH
20H
llH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
mm = MSB of the bank number: 50H — 51H (80 — 81)
“mm” is adjustable from 0,1 to 126,127.
ll = LSB of the bank number: 0H (0)
The Bank Select is suspended until receiving a program change.
This message is ignored when “Program bank sel” of the system common is OFF.
If the part which MIDI receive channel is set the same as the control channel, the performance is changed when
receive the bank select message.
The bank number specified as following.
Bank select
MSB
LSB
Program change
Media (Patch number)
80
0
1 — 128
Preset A (#1 — #128)
81
0
1 — 127
Preset B (#129 — #255)
When the module receives bank select LSB, it will always count as 0.
• Modulation
Status
Second
Third
BnH
01H
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Modulation depth: 00H — 7FH (0 — 127)
The effect of the modulation depends on the value of “Mod1 — 4” of the patch tone.
This message is ignored when “Receive Modulation” of the system common is OFF.
• Portamento time
Status
Second
Third
BnH
05H
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Portamento time: 00H — 7FH (0 — 127)
You can adjust the portamento time of the patch common.
This message is ignored when “Receive Control change” of the system common is OFF.
• Volume
Status
Second
Third
BnH
07H
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Volume: 00H — 7FH (0 — 127)
You can adjust the volume of specified channel.
This message is ignored when “Receive volume” of the system common is OFF.
In the performance mode, ignored when the “Receive volume switch” is OFF for each part.
This message is ignored when “Volume switch” of the patch tone is OFF.
• Pan
Status
Second
Third
BnH
0AH
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Pan: 00H — 7FH (0 — 127)
0 represents the left end, 64 the center, and 127 the right end.
This message is ignored when “Receive Control Change” of the system common is OFF.
• Expression
Status
Second
Third
BnH
0BH
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Expression: 00H — 7FH (0 — 127)
The effect of the expression depends on the value of “Exp1 — 4” of the patch tone.
This message is ignored when “Receive Control Change” of the system common is OFF.
• Hold 1
Status
Second
Third
BnH
40H
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Control value: 00H — 7FH (0 — 127) 0 — 63 = OFF, 64 — 127 = ON
Note played can be sustained for as long as the time that elapses between turning hold on and off.
This message is ignored when “Receive Control Change” of the system common is OFF.
In the performance mode, ignored when the “hold1 receive switch” is OFF for each part.
In the rhythm part (part8), ignored when “ENV mode” is at “NO-SUSTAIN” for each rhythm tone.
This message is ignored when “Hold-1 switch” of patch tone is OFF.
• Portamento
Status
Second
Third
BnH
41H
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Control value: 00H — 7FH (0 — 127) 0 — 63 = OFF, 64 — 127 = ON
Switches over “Portamento sw” of patch common.
This message is ignored when “Receive control change” of the system common is OFF.
• Sostenuto
Status
Second
Third
BnH
42H
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Control value: 00H — 7FH (0 — 127) 0 — 63 = OFF, 64 — 127 = ON
• Soft
Status
Second
Third
BnH
43H
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Control value: 00H — 7FH (0 — 127)
The value is changed, and the “Soft” effect change.
• Effect 1 depth (Reverb send level)
Status
Second
Third
BnH
5BH
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = Control value: 00H — 7FH (0 — 127)
You can adjust the Reverb send level of specified channel.
This message is ignored when “Receive control change” of the system common is OFF.
• Effect 3 depth (Chorus send level)
Status
Second
Third
BnH
5DH
vvH
n = MIDI channel number: 0H — FH (ch.1 — ch.16)
vv = control value: 00H — 7FH (0 — 127)
12
SOUND MODULE
Date: Feb. 22, 1995
Model:
MIDI IMPLEMENTATION
Version 1.00
Sound Expansion Series
