manualshive.com logo in svg

Roland SolJet PROII SC-540, Руководство пользователя

Поделиться
Скачать
Roland SolJet PROII SC-540 Скачать руководство пользователя страница 6

4

Features of the SC-540

What Is the SC-540?

The SC-540 is a large-format printer equipped with a cutting feature and combining high speed with high print quality.
Not only can it be used either solely for printing or solely for cutting, but it can also perform printing and cutting
simultaneously. Also, using the crop-mark feature lets you remove media after printing, then load it again and perform
cutting, positioning it accurately. It also achieves better weatherability through the use of SOL INK.

Built-in Print Server

This machine has a built-in print server (Roland-PrintServer) as a network interface. When you use the print server, you
can send printing data to the machine from anywhere on the network.

Includes a Software Raster Image Processor (RIP)

Software RIP, which is included with the machine, lets you use your computer to perform raster image processing for
printing data such as PostScript files exported from a program and output the data to the machine.

Содержание SolJet PROII SC-540





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды