manualshive.com logo in svg

Roland SolJet PROII SC-540, Руководство пользователя

Поделиться
Скачать
Roland SolJet PROII SC-540 Скачать руководство пользователя страница 5

3

Copyright © 2002 Roland DG Corporation

http://www.rolanddg.com/

Contents

5. Menus and Keys ......................................................................................................... 89

5-1 Display Menus Flowchart ...................................................................................................................... 90

5-2 Description of Menus ............................................................................................................................ 96

5-3 Description of Keys ............................................................................................................................... 99

6. What to Do If... .......................................................................................................... 101

6-1 What to Do If... .................................................................................................................................... 102

The machine doesn't run ......................................................................................................................................................... 102

Clean, attractive printing is impossible .................................................................................................................................. 103

The media becomes jammed .................................................................................................................................................. 106

What to Do If the Printing Carriage Does Not Operate ......................................................................................................... 107

6-2 What to Do If an Error Message Appears ........................................................................................... 109

7. Appendix ................................................................................................................... 113

7-1 Specifications .......................................................................................................................................114

Main Unit Specification .......................................................................................................................................................... 114

Interface Specifications .......................................................................................................................................................... 115

Network Interface Specifications ........................................................................................................................................... 115

7-2 Media Conditions ..................................................................................................................................116

Usable Media .......................................................................................................................................................................... 116

Acceptable Media Width ........................................................................................................................................................ 117

7-3 About the Printing or Cutting Area ........................................................................................................118

7-4 The Media-cutoff Location During Continuous Printing .......................................................................119

7-5 About Blade Life .................................................................................................................................. 120

SOLJET

TM

 and SOL INK

TM

 are trademarks of Roland DG Corporation.

Other company names and product name are trademarks or registered trademarks of their respective holders.

Содержание SolJet PROII SC-540





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды