manualshive.com logo in svg

Roland SF-200, Руководство по установке


Поделиться
Скачать
background image

Deciding On an Installation Environment

Deciding On an Installation Site

Install the machine in a quiet, stable location offering good operating conditions. An unsuitable location can cause 
accidents, fire, faulty operation, or breakdown.

WARNING

 

Install the machine in a location that is level, stable, and able to bear the weight 

of the machine.

The total weight of the machine may reach 118 kg (260.1 lb.) or more. Installation in 
an unsuitable location may cause a major accident, including tip over, fall, or collapse.

CAUTION

 

Unloading and emplacement are operations that must be performed by four 

persons or more.

Tasks that require undue effort when performed by a small number of persons may 

result in physical injury. Also, if dropped, such items may cause injury.

WARNING

 

Never install this machine outside or in any location where exposure to water or 

high humidity may occur.

Current leakage may cause electrical shock or fire.

WARNING

 

Never install the machine close to any flammable object or in a gas-filled location.

Combustion or explosion could occur.

WARNING

 

Position so that the power plug is within immediate reach at all times.

This is to enable quick disconnection of the power plug in the event of an 
emergency. Install the machine next to an electrical outlet. Also, provide enough 
empty space to allow immediate access to the electrical outlet.

CAUTION

 

Ensure adequate ventilation for the work area.

Failing to perform ventilation may result in a health hazard or danger of 
combustion due to ink fumes.

Unsuitable installation sites

•   Locations subject to large fluctuations in temperature or humidity
•   Locations subject to shaking or vibration
•   Locations where the floor is tilted, not level, or unstable
•   Dusty locations
•   Locations exposed to direct sunlight
•   Locations near air-conditioning or heating equipment
•   Locations exposed to water or moving air
•   Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic energy

Point

When you install the machine, check that all four rubber feet of the machine contact the ground.
If any of the rubber feet do not contact the ground, you can adjust their height by rotating them.

20

2.Installation

Содержание SF-200



















































Отзывы:

Нет отзывов

Похожие инструкции для SF-200

Бренды по названию

Популярные бренды

Загрузить еще бренды