6—Using the S-4000 System
64
S-4000 Digital Snake Owner’s Manual
Using the S-4000R Remote Controller
When the S-4000R is connected to the S-4000 System, you can:
•
control S-4000S input channel functions
—including preamp gain, pad, and phantom power.
•
monitor signal level status of the system’s input channels
—including the presence of signal and
overload (clip).
•
monitor the level of the system’s input channels
—using the eight-segment LED input meter.
•
monitor system status
—using the various indicators on the S-4000R panel.
•
store and recall
—10 different sets of S-4000S channel settings
To facilitate custom labeling for a particular installation or multiple S-4000 Systems, the S-4000S
is shipped from the factory without channel number labels on its input modules. See
Appendix B:
Connector Information
for an illustration that identifies the S-4000S’s input channels for channel
selection on the S-4000R.
When the S-4000R is connected to a unit set as a Split REAC device, only system and signal level
monitoring is possible. See Chapter 7 for more about split setups.
In the following sections, we’ll show you how to use the S-4000R’s functions. Before proceeding, make
sure that the S-4000R is connected to the S-4000S or S-4000H as described on Page 55.
Lock Mode
The S-4000R has a Lock mode that blocks the editing of S-4000S input
channels. This protects the current channel settings from accidental changes
during a live performance.
•
To lock the S-4000R
—press LOCK so its indicator lights. When locked,
S-4000S channel settings cannot be adjusted.
•
To unlock the S-4000R
—press and hold LOCK until its indicator goes out
(approximately 1.5 seconds). When unlocked, S-4000S channel settings
can be adjusted.
When the S-4000R is powered up, it will remember its last Lock mode state (locked or
unlocked).
When the S-4000R is in a locked state, you can still use the CHANNEL knob to select channels
whose signal level you want to monitor with the LED input meter.
Содержание RSS Digital Snake S-4000
