Roland RSS Digital Snake S-4000 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 108

Roland RSS Digital Snake S-4000 Скачать руководство пользователя страница 30

4—Panel Descriptions

30

S-4000 Digital Snake Owner’s Manual

4—CLIP CLEAR•ENTER Button

The CLIP CLEAR•ENTER button is a dual-function button. It’s used to:

•

clear the clip indicators

—When an input signal connected to one of the system’s audio inputs

exceeds 0 dB (in the digital domain), the corresponding clip indicators on the S-4000R light, and
the CLIP CLEAR•ENTER button flashes. To turn off all clip lights, press CLIP CLEAR•ENTER so that
it stops flashing.

•

finalize a selection

—When a selection is made (such as a memory preset), press CLIP CLEAR•ENTER

to finalize the selection.

5—PAD Button

Press the PAD button so its indicator lights to engage a 20 dB pad on the currently selected input
channel.

To disengage the pad, select the desired channel and press the PAD button so its indicator goes out.

6—P48 V Button

Each S-4000S input channel can p48 V phantom power to connected devices that require it
(such as condenser microphones and active direct boxes).

Press the P48 V button so its indicator lights to turn on phantom power on the currently
selected input channel.

To turn off phantom power, select the desired channel and press P48 V so its indicator
goes out.

Always turn the phantom power off when connecting any device other than condenser
microphones that require phantom power. You risk causing damage if you mistakenly supply
phantom power to dynamic microphones, audio playback devices, or other devices that don’t
require such power. Be sure to check the specifications of any microphone you intend to use
by referring to the manual that came with it. (This instrument’s phantom power: 48 V DC, 14
mA Max.)

7—GAIN Knob

Use this knob to set the preamp gain for the currently selected S-4000S input channel. Indicator lights
surrounding the GAIN knob show the current gain setting.

Each S-4000S input channel’s gain range is -45 to +10 dBu with the pad on, and -65 to -10 dBu with
the pad off.

8—Input Signal Level Meter

This eight-segment LED meter indicates signal level for the currently selected input channel.

«
...
28
29
30
31
32
...
»

Содержание RSS Digital Snake S-4000













































































































Отзывы:

Нет отзывов