Roland RSS Digital Snake S-4000 Скачать руководство пользователя страница 29

Страница: 29 / 108

S-4000 Digital Snake Owner’s Manual

4—Panel Descriptions

S-4000R Remote Controller

S-4000R Front Panel

��

�

1—Memory Buttons

The S-4000R provides ten memory presets for storing S-4000S input channel settings. Use the RECALL
and STORE buttons to recall and store settings.

See Page 70 to learn how to recall and store memory presets.

2—CHANNEL Knob and LED Display

Use the CHANNEL knob to select an input channel for editing or signal level monitoring. The currently
selected channel is shown in the LED display.

The CHANNEL knob and LED display are also used to select memory presets and link odd/even
channel pairs (Stereo Link function).

See Page 66 to learn how to edit channel settings.

3—LOCK Button

The LOCK button allows you to lock the S-4000R so that input channel settings cannot be altered.

The S-4000R is locked when the LOCK button is lit. To unlock the S-4000R, hold the LOCK button
until its light goes out.

To retain the current S-4000S input channel settings, lock the S-4000R before powering down
the S-4000 System. When the system is powered up, the settings will return to the state they
were in when the S-4000R was last locked.

Содержание RSS Digital Snake S-4000













































































































Результаты поиска

Содержание RSS Digital Snake S-4000

Отзывы:

Roland RSS Digital Snake S-4000, Руководство пользователя, Страница: 29 / 108

Результаты поиска

Содержание RSS Digital Snake S-4000

Отзывы: