Roland monoFabARM-10, Руководство пользователя

Страница: 44 / 53

Appendix
44
Symptom Points to check Action Refer to
The job does not solidify
Is the bottom of the liquid material vat dirty
or cloudy?
If the liquid material vat is dirty, wash it.
Set the non-cloudy part of the bottom of the liquid material vat toward
the back of the machine.
Alternately, replace the liquid material vat with a new one.
p. 39, p. 41, p. 42
Has the projector reached the end of its
service life?
It is recommended that you replace the projector. p. 42
The job does not attach
to the printing platform
(it remains in the liquid
material vat)
Is the bottom of the liquid material vat dirty
or cloudy?
If the liquid material vat is dirty, wash it.
Set the non-cloudy part of the bottom of the liquid material vat toward
the back of the machine.
Alternately, replace the liquid material vat with a new one.
p. 39, p. 41, p. 42
Is the surface of the printing platform dirty?
Is it scratched or deformed?
If the printing platform is dirty, wash it.
If it is scratched or deformed, replace it with a new printing platform.
p. 36, p. 42
Has the initial printing height of the
printing platform been adjusted?
Appropriately adjust the initial printing height. p. 24
The job is chipped (it is
not a complete shape)
Is the bottom of the liquid material vat dirty
or cloudy?
If the liquid material vat is dirty, wash it.
Set the non-cloudy part of the bottom of the liquid material vat toward
the back of the machine.
Alternately, replace the liquid material vat with a new one.
p. 39, p. 41, p. 42
Is there enough resin in the liquid material
vat? The machine cannot print if there is no resin in the printing part of the
liquid material vat. Check that there is enough resin left for printing.
p. 26
Is there a problem with the angle of the
machine?
It is necessary to position the machine on an angle so that the
remaining resin collects in the printing part (the back of the liquid
material vat) even as the amount of resin decreases during printing. For
information on how to set up the machine and check the angle, refer to
the
“Setup Guide.”
“Roland DG Start-up page”
http://startup.rolanddg.com/
Is the object contained within the work
area? Areas of data that extend outside the work area will not be printed.
Check that the data is contained within the work area.
p. 17
There is no problem with
the data in the preview
display, but job is
printed in an undesired
shape
Are you using a secondary monitor with the
computer?
Using multiple monitors can sometimes affect printing.
Do not connect a secondary monitor to the computer.
—
Did you use another program or switch to
another program during printing?
Using multiple programs and switching between programs (tasks) can
sometimes affect printing.
To not use (launch) other programs at the same time as monoFab Player
AM.
—