Roland monoFabARM-10, Руководство пользователя

Страница: 45 / 53

Appendix
45
I can’t install the driver
If a wizard does not appear even though you have connected the USB cable, do the following:
Windows 8 / Windows 8.1 Windows 7
1.
Connect the machine to the computer with the USB cable and turn on the machine.
2.
If the Found New Hardware Wizard appears, click [Cancel] . Disconnect any USB cables for printers or other such equipment other than
this machine.
3.
From
[Start]
, click
[Desktop]
. Point to the lower-right corner of the
screen to display the charms, and click
[Settings]
.
3.
Click the
[Start]
menu, then right-click
[Computer]
. Click
[Properties]
.
4.
From [Control Panel] , click [Hardware and Sound] and then [Device
Manager] . If a “User Account Control” window appears, click
[Continue] .
The
“Device Manager”
appears.
4.
Click
[Device Manager]
. If a
“User Account Control”
window appears, click
[Continue]
.
The “Device Manager” appears.
5.
From the
[View]
menu, click
[Show hidden devices]
.
6.
In the list, find [Printers] or [Other devices] , then double-click it. When the model name you are using or “Unknown device” appears
below the item you selected, click it to choose it.
7.
Go to the [Action] menu, and click [Uninstall] .
8.
In the “Confirm Device Uninstall” window, select [Delete the driver software for this device.] , then click [OK] .
Close the
[Device Manager]
.
9.
Detach the USB cable connected to the printer, and restart Windows.
10.
Uninstall the driver according to the procedure in “How to Start the Machine” (p. 9).
11.
Reinstall the driver again following the driver installation procedure.
"
For information on the driver installation procedure, refer to the
“Roland DG Start-up page”
(http://startup.rolanddg.com/).