Roland Metaza MPX-90, Руководство пользователя

Страница: 51 / 120

49
Chapter 3 Making Prints
3-3 Preparing Print Data (METAZAStudio)

At [Look in], select the location
of the file.
At [Files of type], select either
[Picture file] or [Adobe Illustrator
file].
Select the file you want.
Click [Open].
The specified image is imported and
displayed with the margins you set.
You can vary the arrangement of the
placed image, such as by changing its
size or orientation or by adding borders
around it.

P. 58, "4-1 Tips and Tricks for Image
Layout"
If the material has holes, take care to ensure that the image is not laid out over the holes. If you include
the holes in the printing area, the marking pin might hit the edge of the material, damaging it.

P. 59, "Adjusting the Location, Size, or Angle of an Image"
1mm
( 0.04 in. )
1mm
( 0.04 in. )
The printing area
lies over a hole.
No margins are
present at the edges
of the material.
The printing area
extends beyond
the material.
Printing area
Not OK
OK
Not OK Not OK
Printing area Printing area
Printing area