Roland M-380 страница 3 Скачать руководство пользователя

Страница: 3 / 21

Functionality added

●

A function has been added to exclusively switch off sends to MAIN L/R or to MAIN C when sends to MAIN L/R and MAIN C are on

(p. 16).

●

New functionality has been added to the user buttons (p. 16).

• DISPLAY BLACKOUT

●

A function has been added that automatically applies the channel names on the M-380 to the track names on the R-1000 when

an R-1000 48-track recorder/player is connected and the M-380 is used as a recording source (p. 17).

●

The following RS-232C commands have been added.

For more information, refer to "V-Mixer RS-232C Reference."

◆

Control commands

• Display blackout/cancel blackout
• Display brightness setting
• Panel brightness setting
• Lamp brightness setting

◆

Request command

• REAC connection status request
• Display blackout status request
• Display brightness request
• Panel brightness request
• Lamp brightness request

◆

Reply-use commands

• Error status
• Connection-destination REAC device error status

●

Added the function to control an R-1000 remotely.

For more information, refer to "R-1000 Remote Control Guide."

Functionality added in version 1.31

Содержание M-380






















Результаты поиска

Содержание M-380

Отзывы:

Похожие инструкции для M-380

Бренды по названию

Популярные бренды

Roland M-380, Руководство пользователя

Результаты поиска

Содержание M-380

Отзывы:

Похожие инструкции для M-380

Бренды по названию

Популярные бренды