![Roland KR-3 Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/roland/kr-3/kr-3_owners-manual_1481049011.webp)
11
KR-3 – Connecting external amplifiers and other devices
ENGLISH
ENGLISH
ENGLISH
ENGLISH
About the adjuster
When you move the KR-3 or if you feel that the pedals
are unstable, adjust the adjuster located below the
pedals as follows.
Rotate the adjuster to lower it so that it is in firm con-
tact with the floor. If there is a gap between the pedals
and the floor, the pedals may be damaged. In particu-
lar when placing the instrument on carpet, adjust this
so that the pedals firmly contact the floor.
3.8 Connecting external
amplifiers and other devices
If the KR-3’s amplification system doesn’t deliver
enough power for your application, you can take
advantage of its OUTPUT jacks.
Sending audio to external equipment
Before connecting the KR-3 to another piece of equip-
ment, turn off the power to both devices.
If you wish to amplify the KR-3 through an external
system, or record your music using a tape recorder,
connect the KR-3’s OUTPUT jacks to the AUX IN,
LINE IN or CH IN jacks of the external (keyboard)
amplifier, mixer or tape deck.
Note: If you are connecting the KR-3 to a device with a
monaural input, be sure to use the L/MONO jack.
Note: For cassette decks or HiFi amplifiers, you need audio
leads with mono jacks at one end and (usually) RCA/cinch
jacks at the other.
After connecting the KR-3 to the amplifier, etc., be
sure to switch on the KR-3 and the external device(s)
in the following sequence:
1.
First turn on the power to the KR-3.
2.
Then turn on the power to the mixing console,
amp, etc. (in that order).
Receiving audio signals from external sources
You can connect the audio outputs of an external
MIDI instrument, CD or cassette player, etc., to the
INPUT jacks. That has the advantage that such signals
can be amplified by the KR-3 and are therefore also
present in the headphones (if connected).
To connect an external signal source, follow the
instructions above but be sure to connect the LINE
OUT, etc., jacks of the external source to the KR-3’s
INPUT jacks.
Adjuster
To the AUX IN/LINE IN jacks of the external amplifier/
mixer, etc.
From the LINE OUT, etc., jacks of the external instru-
ment, CD player, etc.
KR-3_Book Page 11 Wednesday, July 10, 2002 10:27 AM
Содержание KR-3
Страница 60: ...KR 3 Owner s Manual Tones Drum Sets Music Styles 164 Notes KR 3_Book Page 164 Wednesday July 10 2002 10 27 AM...
Страница 62: ...KR 3 Owner s Manual Tones Drum Sets Music Styles 166 KR 3_Book Page 166 Wednesday July 10 2002 10 27 AM...
Страница 64: ...KR 3 Owner s Manual Tones Drum Sets Music Styles 168 KR 3_Book Page 168 Wednesday July 10 2002 10 27 AM...