Roland KIWI-3P Скачать руководство пользователя | Manualshive

Страница: 19 / 60

background image

19

Arpeggiator

The KiwiTechnics 3P Upgrade has a
built in Arpeggiator that can be
applied to any sound.

Arpeggiator Mode is entered and
exited by pressing and releasing the
ARP (JX-3P Mute) button.

The ARP button will flash when the
ARP is running.

The   clock   for   the   Arpeggiator   can
be   divided   from   the   master   clock
using the ARP DIVIDE button (JX-3P
SEQ WRITE button) and the divide
setting   changed   using   the   SENS
slider. The 13 divide options are:-

Half Note (48/Step)
Quarter note (24/Step)
8th note (12/Step)
8th note, 1/2 swing (14,10/Step)
8th note, full swing (16,8/Step)
8th note triplets (8/Step)
16th note (6/Step)
16th note, half swing (7,5/Step)
16th note, full swing (8,4/Step)
16th note triplets (4/Step)
32nd note (3/Step)
32nd note triplets (2/Step)
64th note triplets (1/Step)

A   long   press   of   the   HOLD   button
allows   the   ARP   MODE   to   be
changed   using   the   SENS   slider.
Press HOLD  or Cancel  to exit this
mode.   Options   are   UP,   DOWN,
UP/DOWN, RANDOM & AS PLAYED

A   long   press   of   the   KEY   TRANS
button allows the ARP RANGE to be
changed   using   the   SENS   slider.
Press HOLD  or Cancel  to exit this
mode.   Options   are   1,   2,   3   or   4
Octaves.

Note - If the Arpeggiator notes held
are spread over more than 1 octave
and more than one octave is
selected in the Arp Range the notes
played will be as follows. All the first
octave notes held will play followed
by the same pattern moved up one
or two octaves. The result of this will
be the first note of the second pass
can be lower than the last note of
the first pass. This can sound odd if
you have selected one direction for
the Arp Mode.

www.kiwitechnics.com

Kiwi-3P Matrix Upgrade User Manual v1.2

«
...
17
18
19
20
21
...
»

Содержание KIWI-3P





























































Отзывы:

Нет отзывов

Похожие инструкции для KIWI-3P

Бренд: Behringer Страницы: 5

Бренд: Blaupunkt Страницы: 28

Бренд: Korg Страницы: 3

Бренд: Korg Страницы: 21

Бренд: Korg Страницы: 94

Бренд: Cirrus Logic Страницы: 26

EURO STAGE ES30

Бренд: Elby Designs Страницы: 3

Бренд: Nektar Страницы: 36

Бренд: Yamaha Страницы: 46

Бренд: Yamaha Страницы: 28

Бренд: EFM Страницы: 3

Бренд: EFM Страницы: 4

Бренд: EFM Страницы: 7

Бренд: EFM Страницы: 3

Бренд: EFM Страницы: 7

EFM Mad Mouse Pro

Бренд: EFM Synthesizers Страницы: 27

Бренд: Crumar Страницы: 15

Бренд: Crumar Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды