ES30 Dual Stereo Panner
ELBY Designs - Laurie Biddulph
9 Follan Close, Kariong, NSW 2250, Australia
[email protected]
http://www.elby-designs.com
1 of 3
Construction Guide
Revision 1.0
October 5
th
, 2017
Страница 1: ...ereo Panner ELBY Designs Laurie Biddulph 9 Follan Close Kariong NSW 2250 Australia elby designs bigpond com http www elby designs com 1 of 3 ES30 Dual Stereo Panner Construction Guide Revision 1 0 October 5th 2017 ...
Страница 2: ... the 4 Carrier Board assemblies 3D Model 2 The 2x GAIN CV assemblies need to have R124 fitted to the underside of the board as shown here 3D Model 3 Fit all components to the boards following normal assembly guidelines except for the sub assemblies 4 Fit 2x sub assemblies to the Column 1 board but do not solder 5 Offer the assembly up to the front panel and secure using the supplied nuts 6 Solder ...
Страница 3: ... 50Hz 5VDC sawtooth to PAN CV 2 3 Set PAN 2 to L 4 Set PAN CV 2 to L R 5 Monitor TP6 6 Adjust P202 for minimum output 7 Set PAN 2 to R 8 Set PAN CV 2 to R L 9 Monitor TP5 10 Adjust P201 for minimum output GAIN ADJUST CHANNEL 1 1 Set GAIN 1 fully clockwise 2 Connect 1kHz 5VAC triangle to CHANNEL 1 3 Set PAN 1 to R 4 Monitor TP5 5 Adjust P103 1 for an output of 5 5VAC p p 6 Set PAN 1 to L 7 Monitor ...
