Roland iModela, Руководство по устранению неисправностей

Страница: 4 / 12

4
Procedure:
- Left-click the icon at the top of the iModela Controller window.
- Click [Maintenance].
- Maintenance Window for iModela appears
- Click the [Confirm] tab.
- Click Idling [Start].
a) If the operation test can be performed with no problems, there may be memory or hard disk space issues.
b) However, if the operation test could not be performed, continue to "3) Driver software issues" below.
3) Driver software issues
If points one and two fail to resolve the issue, then a problem with the driver software has occurred.
In this case, re-installing the driver software as described below may revolve the issue.
However, since all of the specified settings will be lost when the driver software is re-installed, make note of the
necessary settings to save them for later use.
Q2: The driver cannot be correctly installed.
A: If installation stops before completion or if the wizard does not appear when the USB cable is used to connect
the machine to the PC, follow the appropriate procedure described below.
• Windows 7
1. Use the USB cable to connect the machine to the computer. At this time, unplug the USB cable of any printer
other than this machine.