63
Chapter 6. Creating an Original Pattern
Chapter 6
Inputting notes
Changing the location at which to input notes
Turn [VALUE] to move to the next (previous) grid line.
Hold down [HOLD] and turn [VALUE] to move in steps of a
tick.
When you reach the end of the measure, you will move to the
next (previous) measure.
Specifying the note to input
Hold down a REC FUNCTION button [NOTE NUMBER]–
[GATE TIME], and turn [VALUE], or move your finger
horizontally on the D-FIELD to set the pitch/strength/length
of the note that will be newly input.
* 1: 32 (32nd note), 16T (16th note triplets), 16 (16th note), 8T
(8th note triplets), 8 (8th note), 4T (quarter note triplets), 4
(quarter note), 2 (half note), 1 (whole note)
Note settings for the D-FIELD
Specify the note number, velocity, and gate time by moving
your finger to left and right on the D-FIELD.
The type of note can be specified by pressing the eight areas
of the D-FIELD.
Inputting/erasing notes
When you press [ENTER], the note you specified using the
REC FUNCTION buttons will be input at the current tick.
If you press [EXIT (ERASE)], the note at the current tick will
be erased.
* Only notes specified by the REC FUNCTION [NOTE
NUMBER] will be displayed.
Using the D-FIELD to enter notes
During step recording, you can press the eight areas of the D-
FIELD to record efficiently.
fig.Pad
Part editing while carrying out step
recording
If you perform part edit operations during step recording,
the part settings will be modified, but the edit operations will
not be recorded.
Operation
Function
Setting
[NOTE NUM-
BER]+[VALUE]
Specify the pitch of
the note.
C–(C-1)–G9
[VELOCI-
TY]+[VALUE]
Specify the strength
(velocity) of the note.
1–127
[NOTE
TYPE]+[VALUE]
Specify the time value
of the note.
32, 16T, 16, 8T, 8,
4T, 4, 2, 1
[GATE
TIME]+[VALUE]
Specify the length
(gate time) that the
note will be held.
5–200 (%)
No.
Notes
1
32 (32nd note)
2
16T (16th note triplets)
3
16 (16th note)
4
8T (8th note triplets)
5
8 (8th note)
6
4T (quarter note triplets)
7
4 (quarter note)
8
2 (half note)
No.
Function
Explanation
1
REST
Input a rest at the current tick and
advance to the next tick.
2
ENTER
Input a note at the current tick and
advance to the next tick.
3
ERASE
Erase the note at the current tick.
4
TIE
Extend the length of the most-recent-
ly input note by the amount of the
current REC FUNCTION setting.
5
PREV NOTE
Move to the note of the same note
number located immediately before
the current tick.
6
NEXT NOTE
More to the note of the same note
number located immediately after
the current tick.
7
SEARCH BWD
Move to the note located immediate-
ly before the current tick, regardless
of the note number.
8
SEARCH FWD
Move to the note located immediate-
ly after the current tick, regardless of
the note number.
Содержание Groovebox D2
Страница 113: ...MEMO ...
Страница 114: ...MEMO ...