Roland CUBE 120XL BASS, Руководство пользователя

Страница: 6 / 148

4
1. BASS INPUT Jack
Connect your bass here.
2. [PAD] Switch (CUBE-120XL BASS only)
This adjusts the degree of amplification in the BASS INPUT circuitry
(the input sensitivity).
Switching this on lowers the input sensitivity (-10 dB).
Switch this on if distortion occurs in this device’s input section as
the result of using basses with high output signal levels or using
connected devices. We recommend that this be switched off for
ordinary use.
3.
[COMP/DRIVE] Knob
Turn this knob to COMP (Compression) or DRIVE to switch to that
effect. Turn the knob to adjust the amount of effect applied.
You can also turn COMP/DRIVE on and off using optional foot switches.
Knob Position Description
COMP
This effect evens out the input signal levels, thus
evening out the sound. Turning the knob to the right
increases the compression effect.
DRIVE
This effect adds distortion to the sound. Turning the
knob to the right increases the distortion.
The COMP/DRIVE indicator lights up when COMP or DRIVE is on, and
goes out when turned off.
4.
[SHAPE] Switch
This effect alters the COSM amps’ tonal characteristics. The particular
effect obtained varies according to the amp selected with the Type
switch (
6
).
5.
[TUNER] Switch
Use this when you want to tune your bass. When you turn on the
switch, it will light red, and you’ll be able to use the Tuner function.
For more detailed information, refer to “Using the Tuner Function” (p. 12).
Panel Descriptions
Control Panel
CUBE-60XL BASS
16 17 20 21 18 19 15 11 12
1 6 7 8 9 10 22 3 4 5
CUBE-120XL BASS
15 16 17 20 22 18 19 14 11 13
1 2 6 7 8 9 10 3 4 5