11
Basic model
Model with rail
(in addition to basic equipment):
• 1 set of panels comprises:
- 2x front panels
- 2x rear panels
•
4 hinges
• 1 set of panels comprises:
- 2x front panels
- 2x rear panels
•
4 hinges
•
1 lid
• Rail
Model with panels
(in addition to basic equipment):
Model with panels
(in addition to basic equipment):
Have the following parts to hand:
Base plate
Kickstand
Socket head
cap screws
2 Springs
9.3 Fitting the kickstand
You will require a 5 mm Allen key to tighten the screws. To ensure you tighten to an exact
torque (9.5 Nm), you must use a torque wrench.
1. Place the base plate bottom side up on a flat surface.
2. Position the kickstand so that the pre-drilled holes of the stand and the pre-drilled holes of
the base plate are on top of each other.
