manualshive.com logo in svg

Roland 074021E19, Заметки по обслуживанию, Страница: 33 / 59

Поделиться
Скачать
Roland 074021E19 Скачать руководство пользователя страница 33

BK-5

3

Image in 

NTSC format 

Image in 

PAL format 

10. Video out check 

The display shows: 

    Press the following two switches and check the related external Monitor images as follows: 

Note

:

The two image types (NTSC or PAL) are almost the same. The only  difference is that the PAL type is a little bit squashed than the
NTSC type, so carefully check this difference. 

2.

Press

[START/STOP]

 button  to go to next test.  

11. Keyboard check 

The display shows: 

1.

Move the 

MASTER VOL

 knob to the maximum position.

2.

Verify that all keys produce a sound.  

     Press the keys lightly and strongly, ve rifying that the sound volume changes accordingly. 

3.

Press the switch 

ENTER

 to go ahead

4.

Press all keys (one by one) exerting a MEDIUM pressure; for each pressed key you will hear a musical note with the same volume 

Intensity 

5.

Press

[START/STOP]

 button  to go to next test.  

Содержание 074021E19




























































Отзывы:

Нет отзывов