manualshive.com logo in svg

Roland 074021E19, Заметки по обслуживанию, Страница: 29 / 59

Поделиться
Скачать
Roland 074021E19 Скачать руководство пользователя страница 29

BK-5

3

2. Switch and LED  check 

The display shows: 

The display will show the switch to press and the LED associated to it will blink. 
For each switch pressed  the relative LED will be lit. 
At the end of the sequence the test will automatically go to the next test 

The display shows: 

The display will show the switch to press and the LED associated to it will blink. 
For each switch pressed  the relative LED will be lit. 
At the end of the sequence the test will automatically go to the next test 

3. Encoder check 

The display shows: 

1.

Rotate the 

[CURSOR/VALUE] 

dial to right (clockwise) and make sure the value on the display changes from 

0

to

25.

2.

Rotate the

 [CURSOR/VALUE]

 dial to left (counter clockwise) and make sure the value on the display changes from 

25

to

0.

3.

Push the 

[ENTER]

 button and make sure the display shows 

Switch: (On). 

4.

Release the 

[ENTER]

 button and make sure the display shows 

Switch: (Off) OK. 

5.

 Press 

[START/STOP]

 button  to go to next test. 

Содержание 074021E19




























































Отзывы:

Нет отзывов