ROLA-CHEM RC554XP, Руководство по эксплуатации

Страница: 13 / 24

ROLA-CHEM
®
Digital Controller PN 554135 07/11/19 Page: 13 of 24
4.3 Power panel access
4.3.1 Dip switches
The controller has a series of dip switches to control functions that are not normally
accessible on the front panel. These dip switches are located inside the power panel access
cover. To access switches, remove power from the controller and remove power panel
access cover. There are four dip switches- #1 is the top switch. The switch is ‘off’ when in the
left position and ‘on’ in the right position. See appendix for settings.
4.3.2 Fuses
The ORP and pH are independently fused to protect the controller from defective feeders.
These fuses are located inside the lower panel. The fuse holders are shipped with 5 amp
fuses. (Replacement fuses are 5mm x 20mm Fast Acting IEC.)
4.3.3 Flow Switch
The controller has a flow switch terminal located inside the Power Panel Access Cover on the
left side. It is shipped with a jumper in place. The terminal must either have the jumper or a
flow switch installed.
The flow switch light on the face of the controller is also a power light that shows that the
controller is connected to a live power source. If the terminal does not have a closed circuit,
the controller will not turn on.
15
18 EXTERNAL POW ER INPUT
13. FLOW SW ITCH TERMINAL
14. DIP SW ITCH ARRAY
15. FLOW SW ITCH INPUT
12. DATA PORT
17. ORP OUTPUT
16. pH OUTPUT
10. TERMINAL STRIP
11. pH FUSE
9. ORP FUSE
17
18
16
12
14
13
FLOW
RS
4
ON
23
1
FUSE
pH ORP
FUSE
9 9
11
10