Rointe Dalis Pro 200DHW5, Инструкция по эксплуатации

Страница: 14 / 56

14
The heat pump must be (in compliance with
Article 20 of Standard EN 60335-1) fixed to the
ground using the bracket provided.
8.3. Location
Please adhere to the following conditions when choosing a location to install the product:
• Must be installed in a dry, frost-free environment, with containment systems in case
of serious water leaks.
• Not measure less than 20 m
3
.
• Must have structural integrity that is sufficiently robust to support the product weight
when full of water, plus a flat and level surface on which to install the product.
• Must allow access to water mains supply, hot and cold water pipework and a suitable
electrical supply.
• Be readily available for connection to condensation discharge pipe.
• Be sufficiently ventilated and illuminated (if necessary) and in a space of at least 20m
3
.
• Care must be taken when installing the product in a garage or outbuilding. All exposed
pipework must be sufficiently insulated to avoid frost or ice damage.
• When installing the product, ensure that all labels are visible and pipework does not
restrict any work that needs to be carried out on the various components
• It’s important to allow the necessary working space by referring to the dimensions
show in Fig 3 below.
Fig 3 - Location conditions