manualshive.com logo in svg

ROHO AGILITY CARBON, Руководство по эксплуатации

Поделиться
Скачать
ROHO AGILITY CARBON Скачать руководство пользователя страница 8

6

AGILITY CARBON Back System Operation Manual

Wheelchair Compatibility

Warnings:

 

-

Wheelchairs with rigidizer bars may not be compatible with AGILITY CARBON,  

as the rigidizer bar may interfere with angle adjustment. Consult with an 
equipment provider to determine if AGILITY CARBON is compatible with your 
wheelchair.

 

-

If AGILITY CARBON is not positioned to make contact with the Posterior  

Superior Iliac Spine (PSIS), pelvic support and trunk control may be reduced. 

Make sure that AGILITY CARBON is positioned so that the bottom portion makes  
contact with the PSIS,

 

as shown.

Wheelchair Cane Compatibility: Measure the diameter of your back canes.

Warning: If the wheelchair back canes are less than 1 in. (< 2.5 cm) in diameter, you 

will NOT be able to securely install the AGILITY CARBON with the pre-installed hardware. 
Consult with a clinician or the equipment provider to determine if your wheelchair's back 
canes are compatible with AGILITY CARBON Hardware. A 3/4" Outer Cane Clamp is available to 
use with back cane diameters that are 3/4" (2.0 cm).

  

Installation of 3/4" Outer Cane Clamps

1. Use the T-Handle Wrench to 

remove the cane clamp screw and 
Outer Cane Clamp from the back 
shell.

2. Install the 3/4" Outer Cane Clamp 

using the same cane clamp 
screw.

3. Make sure the hardware is 

correctly oriented (See 

H

ardware

 

r

e

-a

ssembly

) and then tighten the 

cane clamp screw two (2) full 
rotations. 

4. Repeat on the other side.
5. Continue with the AGILITY 

CARBON adjustment and 
installation instructions in this manual.

PSIS

PSIS

A

A

Wheelchair Back Cane

cross-section showing circular diameter (A)

The Outer Cane Clamp that is pre-installed on the 
back shell should be used if the wheelchair back 
cane diameter (A) is 1 in. (2.5 cm)

The 3/4" Outer Cane Clamp should be installed if the 
wheelchair back cane diameter (A) is 3/4 in. (2.0 cm).  
Follow the installation instructions below. 
Note: The 3/4" Cane Clamp has a "dimple"  
next to the opening for the Cane Clamp Screw. 

Then, install the 3/4" Outer Cane Clamps.

First, remove the Outer Cane Clamps.

Содержание AGILITY CARBON





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды