11
AGILITY CARBON Back System Operation Manual
Cover Removal and Installation
Warnings:
-
DO NOT remove or install the AGILITY CARBON cover while the individual is in the wheelchair.
-
DO NOT use the AGILITY CARBON without the cover, the foam pad, and the air insert or foam insert.
-
Inspect the cover for damage and replace if necessary.
To Remove the Cover:
2. Pull the cover away from the shell,
releasing it from the fastener strips on
the front side.
1. On the back and bottom side of
the shell, pull the cover flap to
release the cover from the fastener
strip.
To Install the Cover:
1. At the top of the shell, slide the attachment flap
through the cover attachment slot. Press the
fastener strip on the shell and the attachment
flap together to secure the cover. Flip the cover
over the top of the shell.
2. Fold the cover flap over the top of the
shell and press to fastener circles. Make
sure the zipper side of the cover faces
the shell, and press to attach the cover
to the fastener strips on the front side of
the shell.
3. Pull the bottom end of the cover
over the bottom edge of the shell.
Press the fastener strip on the
shell and the cover flap together to
secure the cover.
3. Flip the cover over the top of the shell. Release
the attachment flap from the fastener strip. Pull
the flap through the cover attachment slot to
remove the cover.
