20
6.1 Empty the water tank
⚫
Do not remove the float out of the tank.
Make sure that the float can move freely and
that it will actuate the level switch when the
tank is full.
⚫
Allow the tank to air-dry completely and slide
it back into place within the dehumidifier.
⚫
After you have replaced the tank, plug the
unit back into its power source.
⚫
If the water tank is very dirty, wash it with
cold/warm water. Do not use detergent, steel
wire ball, chemical dust cloth, gasoline,
benzene, thinner or other solvent treatment,
because it may damage the tank caused by
water leakage.
Warning!!!
Use only mild soap, water and soft cloth. Do not use any commercial cleaning solvents.
