Press
“+” or “– “button to increase or decrease the temperature 1
℃
by pressing once.
The unit LED shows the target temperature for 5 seconds and then displays the room temperature
4.Adjust Fan Speed
Press the
“
“button to select a desired fan speed shown as below:
5.Power
When you press
“
“button again, the unit will beep and stop working.
Notice:
Each mode working principle
mode
1.Once the
operation is selected, the indoor temperature sensor detects room temperature.
automatically to select the desired operation mode with
2. When the room temperature ≥24
℃
, the unit will automatically select
mode.
3. When the room temperature
＜
24
℃
, the unit will automatically select
mode.
Dehumidify mode
1.The up centrifugal fan will run at low speed, and the speed can’t be adjusted.
2.The unit adopts constant temperature dehumidifying mode, and the adjustment of temperature is no
effective.
Cool mode
1.When the room temperature is higher than set temperature, the compressor starts to run.
2.When the room temperature is lower than set temperature, the compressor stops, and upper fan operates
at original set speed.
Fan mode
1.The fan runs at set speed, and the compressor does not run.
2.The adjustment of temperature is no effective.
Time function
1.Press “Timer’ button to set Automatically Off time while the unit is running, the timer icon (h) light is on.
2.Press “Timer” button to set Automatically On time while the unit is ready, the timer icon(h)light is on.
3.The time can be adjusted within a range of 1 hour to 24 hours. Press the temp up (+) or temp down (-)
button to increase or decrease the time 1 hour by pressing once.
Sleep mode
1.The
operation is effective when the unit is under
mode.
2.Press the
button in
mode, then the unit will work under sleep mode and the up
centrifugal
fan will
turn to low speed automatically (the speed icon light remains the
