Espresso maker R-988
EN
10
Note: Clean steam outlet with wet sponge immediately after steam stops
generating, but care not to hurt!
7.
Pour the frothed milk into the espresso prepared, now the cappuccino is
ready. Sweeten to taste and if desired, sprinkle the froth with a little cocoa
powder.
8.
Press the Power switch to cut the power source off. All indicators will be
extinguished.
WARNING:
After finishing the “Steam” function, press the coffee switch, if the co
ffee
indicator and steam indicator blink fast, it means that the temperature of the appliance
is too high and the appliance needs to be turned off and have a rest for more than 5
minutes, or you can activate the “Hot water” function to cool down the applia
nce. And
the water pump will stop pumping water automatically if the temperature is normal. And
the coffee will be burnt and there will be overflow at the funnel if the appliance brew
coffee directly without being cooled down.
AUTOMATIC POWER OFF FUNCTION
If there is no any operation within 25 minutes, the unit will power off automatically.
FACTORY RESET
After finish preheating, hold and press double cup coffee switch and steam switch for 3
seconds at the same time, and their corresponding indicators will blink for 3 times, then
the factory reset is finished.
CLEANING AND MAINTENANCE:
1.
Cut off power source and let the coffee maker cool down completely before
cleaning.
