10/23
User’s Guide
HB2637L-EVK-301
© 2022 ROHM Co., Ltd.
No. 65UG002E Rev.001
Apr. 2022
Figure 6: Jumper configurations for choosing the turn off gate drive voltage
Jumpers J2 and J4 are used to select between a negative gate turn off and a 0V gate turn off for high side device and low side
device respectively. If a negative gate turn off is chosen, jumpers J3 and J4 can be used to select between -1.5V or -3V for high
side device and low side device respectively. In Figure 6 various configurations are shown on how to select between negative
gate turn off and 0V.
The user must decide the appropriate turn-on/turn-off drive voltages and then adjust the input supply at connector CO1 and
accordingly place jumpers J2-J4.
Figure 7: Top view of the board with the jumper locations for adjusting turn off gate drive voltage
J2
J3
J4
J5
