PJDK71351-03
MK71351
22/24
Notes
Precautions for the Specification
1) Contents of the Specification are the information at the time of their issuance.
The information contained herein is subject
to change without notice.
2) LAPIS Semiconductor has used reasonable care in preparing the information included in the Specification, but LAPIS
Semiconductor does not warrant that such information is error free. LAPIS Semiconductor assumes no liability whatsoever
for any damages incurred by you resulting from errors in or omissions from the information included herein.
3) The technical information specified herein is intended only to show the typical functions of the Products and examples of
application circuits for the Products. No license, expressly or implied, is granted hereby under any intellectual property
rights or other rights of LAPIS Semiconductor or any third party with respect to the information contained in this
document; therefore LAPIS Semiconductor shall have no responsibility whatsoever for any dispute, concerning such rights
owned by third parties, arising out of the use of such technical information.
4) The Specification contains information related to the LAPIS Semiconductor’s copyright and technical know-how. Any use
of them other than pertaining to the usage of appropriate products is not permitted. Further, the Specification, in part or in
whole, may not be reprinted or reproduced and disclosed to third parties without prior consent of LAPIS Semiconductor.
Precautions for the Products
●Precautions for Safety
1) The Products are designed and produced for application in ordinary electronic equipment (AV equipment, OA equipment,
telecommunication equipment, home appliances, amusement equipment, etc.).
2)
For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and
consult with a LAPIS Semiconductor representative: transportation equipment (i.e. cars, ships, trains), primary
communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and
power transmission systems.
3)
Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power
control systems, and submarine repeaters.
4) The Products are designed for use in a standard environment and not in any special environments.
Application of the Products in a special environment can deteriorate product performance. Accordingly, verification and
confirmation of product performance, prior to use, is recommended if used under the following conditions:
[a] Use in various types of liquid, including water, oils, chemicals, and organic solvents
[b] Use outdoors where the Products are exposed to direct sunlight, or in dusty places
[c] Use in places where the Products are exposed to sea winds or corrosive gases, including
Cl
2
, H
2
S, NH
3
, SO
2
, and NO
2
[d] Use in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use in environment subject to strong vibration and impact.
[f] Use in proximity to heat-producing components, plastic cords, or other flammable items
[g] Use involving sealing or coating the Products with resin or other coating materials
[h] Use of the Products in places subject to dew condensation
[i ] Use in an environment where the temperature is always low, such as in a freezer
5) The Products might receive the radio wave interference from electronic devices such as Wireless LAN devices, Bluetooth
devices, digital cordless telephone, and microwave oven and so on that radiate electromagnetic wave.
6) The Products are not radiation resistant.
7) Verification and confirmation of performance characteristics of Products, after on-board mounting, is advised.
8) Confirm that operation temperature is within the specified range described in the Specification.
