Rohm EXTRA-RV, Перевод оригинального руководства по эксплуатации

Страница: 17 / 24

Disassembly/assembly of the drill chuck | 4
Drill Chuck EXTRA -RV 17 / 24
4.2 Without spindle stop
Disassemble the drill chuck
§ Power supply disconnected (mains plug pulled/battery removed).
1. Open the clamping jaws of the drill chuck .
2.
If installed, screw out the retaining screw (left-hand thread) and re-
move it (Figure A, page 18).
3. With the short shank forward, clamp an Allen key with a key width of 8
- 10 mm into the
drill chuck .
4. Hold the machine spindle with a spanner.
5.
Use an Allen key to loosen the
drill chuck
and unscrew it from the ma-
chine spindle (right-hand thread) (Figure B, C, page 18).
ü drill chuck disassembled.