Rohl Perrin & Rowe GEORGIAN ERA U.KIT1307 Скачать руководство пользователя страница 2

INSTALLATION INSTRUCTIONS

* Where indicated please specify color

Perrin & Rowe is a registered trademark.                                                    9001307U                        Issue 1

SPARES

MINI INSTANT HOT DISPENSERS

Max Temp:
For Mains: 185°F

Recommended
Working Pressures:

Min 22psi
Max 72psi

*IMPORTANT!! ENSURE A PRESSURE REDUCING VALVE (PRV) IS USED IN-LINE
WITH COLD INLET AND IDEALLY SET TO 43.5PSI (3BAR). FAILURE TO DO SO MAY
RESULT IN REDUCED PRODUCT PERFORMANCE.**

IMPORTANT WARNING!!

PLEASE ENSURE THAT THE RECOMMENDED HEATER TANK UNIT (U.1998) AND FILTER KIT (U.1106)IS
USED.

TO AVOID PRESSURISED BOILING WATER AND TO COMPLY WITH US REGULATIONS THIS IS AN OPEN

VENTED PRODUCT.

DO NOT PLUG IN THE UNIT UNTIL ALL WATER CONNECTIONS HAVE BEEN MADE AND THE TANK HAS
FILLED COMPLETELY THEN FLUSHED TO REMOVE AIR.

*IMPORTANT!! ENSURE A PRESSURE REDUCING VALVE (PRV) IS USED IN-LINE WITH COLD INLET AND
IDEALLY SET TO 43.5PSI (3BAR). FAILURE TO DO SO MAY RESULT IN REDUCED PRODUCT PERFORMANCE.*

INSTANT HOT WATER TEMPERATURES CAN REACH 210°F. THE FAUCET IS DESIGNED WITH FEATURES
TO MINIMISE RISK AND POTENTIAL INJURY; TWO ACTION OPERATION, SPRING BACK VALVE AND
DELAYED DELIVERY; BUT SHOULD BE OPERATED OR SUPERVISED BY A RESPONSIBLE ADULT.

PLEASE READ AND FULLY UNDERSTAND THE HEATER TANK INSTRUCTIONS BEFORE USE.

Registration -

 Please visit

www.rohlhome.com/filtration-registration.aspx,

complete the registration card (postage paid) or

phone 1-800-777-9762 to register your product.

O

1 1/4"

HOLE

5

1 / 2

"

10"

6

1

/ 2

"

G3/8"

OUT TO FILTER

FOR HEATER TANK

O

5 I.D

SILICONE TUBE

FROM TANK

O

1 1/7"

BASE RING

5

1 / 2

"

9

1

/ 2

"

7

1

/ 4

"

5

1 / 2

"

10"

6

1

/ 2

"

U.1323: AQUITAINE

U.1347: Mimas

U.1307: Parthian

9.201887*

9.26400

9.15307

9.28620

9.28749

9.13325

9.202008*

9.201166*

U.PRF1

REPLACEMENT

NANO FILTER

9.18162*

9.18846*

9.12323*

9.12348*

9.14321*

9.17801

CARE & MAINTENANCE

• Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is
  required to keep the plated finish in good condition.

• If you wish to occasionally polish your faucet and it has a Chrome, Nickel or Pewter finish, we
  recommend a gentle metal cleaner or metal polish, which is available from hardware and automotive

  parts stores.

• Do not use any cleaners on Gold or English Bronze Faucets.
• Do not use proprietary abrasive liquids, powders, or pads to clean the product. You will damage the
  plated finish and void your warranty.

BEFORE USE

• Carefully check the installation for leaks.
• If further building work is to be carried out in the vicinity, cover the mixer tap to avoid damaging the

  finish.
• Please ensure that the installation complies with the local plumbing codes.

NOTE: Diagram shows faucet

set up with u.1998 (heater

tank) and u.1106 (filter).

FLOW REGULATOR

TO BE FITTED TO 

COLD INLET 9/16"-24

ROHL WARRANTY POLICY

All products supplied by ROHL carry warranties against manufacturing defects.

For full ROHL WARRANTY please contact ROHL or visit www.rohlhome.com

Please contact the local ROHL retailer or showroom where you purchased this product for all warranty
related claims.

SPARE PARTS & SERVICE

3 Parker
Irvine
CA 92618
(714) 557-1933

www.rohlhome.com

Perrin & Rowe products are manufactured in England using
quality materials, the latest technology and built to the highest

standards.

We would like to thank you for purchasing this Perrin & Rowe
product and invite you to view the comprehensive range of Perrin
& Rowe tapware, shower fittings, bathroom accessories, soap
dispensers and bathroomware.

Please contact us to receive our latest product catalogues or
view them online at www.rohlhome.com

houseofrohl.com

Consult your local House of Rohl showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to houseofrohl.com

Содержание Perrin & Rowe GEORGIAN ERA U.KIT1307




















Отзывы: