INSTALLATION INSTRUCTIONS
INSTALLATION CONTINUED
Step 4 – Electrical Connection
Ensure that the installation area is dry and no water has spilled.
Connect the plug to the power socket and turn on the power socket at the switch.
The electronic instant hot water appliance display panel will now light up with
the on / off button illuminated.
Step 5 –Electronic Instant Hot Water Appliance Operation
Electronic Control Display Panel
ON/OFF to control the power it will also control the display ON/OFF.
Confirmation and heating control switch
Temperature setting, 7 temperature settings: 208°F max. 206°F; 203°F; 194°F;185°F’
176°F; 167°F
To turn on the electronic instant hot water appliance touch the
button and hold for 3
seconds until the display lights up.
Touch the
button and press each time so that the temperature settings will change
from 167°F to 176°F to 194°F to 185°F to 194°F to 203°F to 206°F to 208°F continue to
press till the required temperature is seen.To confirm the temperature and start the elec-
tronic instant hot water appliance press the
button and the electronic instant hot
water appliance will start to heat up the water and an audible beep will be heard.
houseofrohl.com
Consult your local House of Rohl showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to houseofrohl.com