Rohde TC 504, Руководство по эксплуатации

Страница: 22 / 96

22
Call a program
You can save up to 10 firing curves (programs) on your TC 504 . The program num-
bers are factory set with standard firing curves and can be modified .The factory set
programs are only optional settings and must be adapted in accordance with your
materials .
*slowly
In the following example we call the firing curve
Program No . 04 and start the firing .
After turning on the TC 504, the red display indi-
cates the actual temperature .
Press the “prog“ key until the red display lights
up and shows program ”P4“ .
The green display changes to the respective end
temperature of the selected program .
Start the firing process
Push the Start-Stop key to start the program .
Prog. Description t0 Rmp1 Tmp1 t1 Rmp2 Tmp2 t2 Rmp3
No. min . (°C/h) (°C) min . (°C/h) (°C) (min) (°C/h)
01 Drying 150°C 0 50 150 10 skip 150 10 skip
02 Drying 200°C 0 50 200 10 skip 200 10 skip
03 Onglaze firing 750°C 0 150 750 10 skip 750 5 skip
04 Biscuit firing 800°C 0 100 600 10 150 800 5 skip
05 Biscuit firing* 850°C 0 80 600 10 100 850 5 skip
06 Biscuit firing 950°C 0 100 600 10 150 950 5 skip
07 Earthenware 1050°C 0 150 300 5 130 1050 20 skip
08 Stone ware 1150°C 0 150 300 5 130 1150 20 skip
09 Stone ware 1240°C 0 150 300 5 130 1240 20 skip
10 Stone ware 1280°C 0 150 300 5 130 1280 20 skip
Please note:
If the program has been started correctly,
the red spot on the red display is illuminated .