Rohde KE 100 L, Инструкция по эксплуатации

Страница: 21 / 80

Status: 01 / 2016 Page
21
of 80
en
gli
sh
4. IMPORTANT SAFETY INSTRUCTIONS
4.1. General information
Please make sure that you fully understand both the safety instructions and the safety icons, in order to eliminate
potential dangers. Before starting to operate the kiln, make sure that you read and fully understand the following safety
instructions.
Keep your instruction manual available at all times. For your own safety only use original spare parts!
Helmut Rohde GmbH does not assume any liability for damage resulting from incorrect or defective heating elements
from other manufacturers. Use only original spare parts - otherwise all warranty claims become void.
4.2. General safety instructions
Caution: Hot surface.
Do not open while hot.
Caution: Disconnect power plug
before opening the switch box!
(BGV A8)
Caution: Dangerous electrically live
components.
The CE marking indicates that the
inspections for conformity have
been correctly carried out in accor-
dance with EC standards: Directive
2006/95/EC, Directive 2004/108/
EC, Directive 93/68/ ECC relating to
CE marking.
4.3. Operating safety instructions
The ROHDE kiln can only be operated safely if the safety instructions are carefully followed:
• When operated industrially, the kiln and controller must undergo a safety check to ensure correct functionality. This
should be carried out by a qualified electrician before the initial operation and then at 4-year intervals in accordance
with DGUV regulation 3 (Accident prevention regulation for Electrical installations and equipment by the German
professional association).
• Maintenance and repair of electronic components must be carried out by a qualified electrician.
• For safety reasons the kiln must be disconnected from the mains supply before any maintenance work is carried
out.
• The kiln must not be operated with an extension cable!