Rohde & Schwarz ZNB20, Руководство пользователя

Страница: 694 / 1332

Command Reference
R&S
®
ZNB/ZNBT
679 User Manual 1173.9163.02 ─ 38
● MEMory .................................................................................................................912
● MMEMory Commands .......................................................................................... 913
● OUTPut Commands ..............................................................................................952
● PROGram Commands ..........................................................................................954
● [SENSe:] Commands ............................................................................................958
● SOURce Commands ...........................................................................................1089
● STATus Commands ............................................................................................1135
● SYSTem Commands .......................................................................................... 1138
● TRACe Commands .............................................................................................1174
● TRIGger Commands ...........................................................................................1177
7.3.1 ABORt Commands
In general,
ABORt...
commands reset the trigger system and place all trigger
sequences in the IDLE state. Any actions related to the trigger system that are in pro-
gress, such as a sweep or acquiring a measurement, shall also be aborted as quickly
as possible.
ABORt
Aborts a running measurement and resets the trigger system.
In continuous sweep mode (
INITiate<Ch>:CONTinuous
on page 909
ON
) the
R&S ZNB/ZNBT automatically starts a new sweep.
Usage: Event
7.3.2 CALCulate Commands
The
CALCulate...
commands perform post-acquisition data processing. Functions
in the
SENSe
subsystem are related to data acquisition, while the
CALCulate
subsys-
tem operates on the data acquired by a
SENSe
function.
7.3.2.1 CALCulate:CLIMits...
The
CALCulate:CLIMits...
commands control the composite limit check.
CALCulate:CLIMits:FAIL?
Returns a 0 or 1 to indicate whether or not a global, composite limit check on several
traces has failed.
Since V2.20 of the R&S ZNB/ZNBT FW the result is automatically recalculated when-
ever a relevant setting is changed, i.e. a subsequent query will return the updated limit
violation state.
SCPI Command Reference